Lease for as low as $/week
6” portal gear lift built for the Polaris RZR XP 1000 and Polaris RZR XP 4 1000 (High Lifter edition). It adds lift at the wheel hubs and puts the gear reduction in the hub, so you get ground clearance and extra torque without asking more of the drivetrain behind it. Choose a 30%, 45% or 60% gear reduction and cast or billet aluminum housings to set the kit up for the riding you do, with single or dual idler gears on the versions that offer them.
Choosing your setup: Single idler is the standard setup; dual idler adds a second idler gear in each portal box, spreading the load over twice the gear surface for the strongest gear set SuperATV makes — dual idler kits come in billet housings only. Cast housings keep the price down, while billet housings are machined from solid aluminum for maximum strength. On gear reduction, a higher percentage gives you more torque for turning bigger tires in mud and rocks at the cost of some top speed, while a lower percentage keeps more top-end for trail riding. Pick ‘With 7-10” Lift Kit’ only if your machine already runs a 7-10” lift kit — the portal hardware differs. Otherwise pick ‘Without 7-10” Lift Kit’. The frame stiffener option adds SuperATV’s frame stiffener kit (+$150.95) — worth adding on machines that will see hard use with big tires.
2017 models — check your bolts first: SuperATV changed the radius-arm bolt size partway through the 2017 model year, so 2017 XP 1000s run either 16mm or 18mm bolts. Check which size your machine has (a 16mm vs 18mm socket on the radius-arm bolts) and pick the matching 2017 year option — the portal hardware is different.
Features:
- Available with billet or cast aluminum housings
- Dual idler gear configuration maximizes strength
- Cool, quiet, precision-ground gears made from 9310 alloy billet steel
- 1.5 in. diameter 4340 hardened steel drive shaft
- Housings use advanced gaskets or O-rings that don’t let anything through
- Universal hub fits all major bolt patterns
- Gear reduction reduces stress on your drivetrain
- Dual idler gear configuration adds a 1” offset
- Lighter than the competition
Fitment:
- Polaris RZR XP 1000 : 2014-2023
- Polaris RZR XP 4 1000 : 2014-2023
Note: 18” or larger wheel required.
Note: 18” wheels cannot exceed 4-1/2” backspacing.
Note: 20” and larger wheels cannot exceed 5” backspacing.
Note: Wheels need to have a center hole of at least 3.25” (82.55mm) or require a 1” wheel spacer.